Quality Aluminium Metal Scrap Composition Control Inspection

Quality Aluminium Metal Scrap Composition Control Inspection

AIM Control (AIM Group®)  is third party in providing inspection certification and quality verification on quality aluminium metal scrap composition control inspection as well other..

Accurate scrap metal analysis and testing for composition, grade and presence of impurities is a key component of scrap metal recovery and recycling.

We analyze accurately shipment of quality aluminium scrap composition and metal scrap composition as well control inspection to monitor the composition of melts, separating, grind, carbonization and others to be examined the foreign substances and matters, the the presence of impurities, i.e Fe, Plastic, Earth, Nonferrous metal, Moisture by water, Paint and calculate input weight, output weight.

AIM Control is a professional expert in anti-cheat trading and prevention of commercial fraud with the carried out a large number of inspections quality aluminium metal scrap control inspection from port of shipment to port of delivery related to quality of scrap goods and complaints and disputes.

Place of quality aluminium scrap composition and metal scrap composition as well control inspection: at factory of supplier, loading ports, loading places, discharging ports, consignee and buyer’s warehouse, others places.

Purpose of quality aluminium scrap composition and metal scrap composition as well control inspection: for buyer to cargoes are meet to specification of PO and Agreement, for claim to determine ratio of foreign materials and extent of damage and loss, for others.

The followings are AIM Control’s quality aluminium metal scrap composition control inspection technique given below

• Settlement, party and umpire analysis.

• Quality and quantity verification.

• Supplier evaluation and qualification.

• Inspections of containerized shipments.

• Issuance of Pre-shipment Inspection Certificate for shipments of Scrap with destination.

• Issuance of Damage / Loss Inspection Report for shipments of Scrap with claim.

Scrap types/conditions:

• Heavy Melting Scrap,

• Stainless Steel Scrap

• Cast Iron Scrap,

• Loose Mild Steel Turnings Scrap For Melting

• Loose Stainless Steel Unblended Scrap

• Melting Iron & Steel Scrap

• Plate Cutting Scrap

• Aluminum Scrap Tablet

• Aluminum Extrusion Scrap Tread,

• Loose Stainless Steel Melting Scrap,

• Aluminum Scrap Talk

• Tablet Aluminum Scrap

It is very important to collect and verify the information in order to avoid a mistake.

1. B/L & cargo manifest details should be identical and there should not be any mismatch in the details, which could lead to customs queries, and cargo detained by customs.

2. B/L & cargo manifest should always bear complete and correct, details, such as (Postal address of a consignee/notify; phone contact number, fax number, email address and preferably person name to be contacted).

3. Container numbers and seal number should be typed with accuracy avoiding whatever error.

4. Cargo description should always be precise and complete and no abbreviation or short names are permitted.

5. Hazardous cargo

6. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges or any other explosive material in any form, either used or otherwise and that the consignment was checked for radiation level and it does not have radiation levels (gamma and neutron) in excess of natural background. Following are the values of:

7. Background radiation level at the place of examination ………

8. Maximum radiation level on the scrap ……….

8. The import consignment is actually metallic scrap/seconds/defective as per the internationally accepted parameters for such a classification.

9. The certificate is true and correct and nothing has been concealed or held there from.

10. Radiation detect process: Equipment measurement ex: Gammmas Scout; Radiation detect: Alpha, Beta, Gamma, and X-ray radiation; AIM Control’s surveyor performs to measure of Radiation Three (03) tests per lot to be stuffed / loaded aluminium scrap and metal scrap into container to find the radiation average on containers shipment: 0. . . Sv/h.

11. Weighing on scale of container, truck & cargo; Weighing on scale of container & truck only to find new weight of aluminium scrap and metal scrap cargo. 

12. Container condition physical inspection: verification of container clean without relevant damages.

13. Visual inspection on material to be stuffed / loaded into each container which piled up on the plant premises.

14. With scrap metal, all inspected material corresponded to HMS ½ (80/20); no bullets; ammunitions, or any explosive material are detected.

15. Sampling (if having analysis component as Zinc, Aluminium, Cadmium, Ferrous, Lead, Etc.

16. Seal & Sealing: after stuffing / loading completed, AIM Control will do or witness the seal & sealing of container’s doors.

Contact us