Banner top 1

Pre-purchase ship condition survey

Pre-purchase ship condition survey

Pre-purchase ship condition survey

Pre-Purchase Ship Condition Survey

AIM Control's Pre-Purchase Ship Condition Survey is Pre-Sale Survey (pre-buy survey) for one motor vessel, AIM Control's actions are consisted of pre-purchase inspection of her condition, sea trial and professional inventories.

For over 30 years AIM Control Survey & Inspection Group has been providing "Professional Marine Services" to Vietnam, International area ship’s owners. Contact us

Pre-Purchase Ship Condition Survey and inspection

Purchase Ship Condition Survey / inspection is a pre-purchase survey is a thorough inspection of the vessel’s structural and watertight integrity, system’s installations, and operating condition, as well as performance. A comprehensive report is issued which includes an equipment list, specifications and detailed list of deficiencies and recommendations. Replacement and market values [in US dollars] are assigned to the vessel. Most lending institutions and insurance companies require a pre-purchase survey.

Pre_Purchase_Ship_Condition_Surveyor

Also known as a "Buyer's Survey", it is a detailed examination/inspection of a vessel to determine its condition and value. The survey is done for a prospective buyer prior to the actual purchase.

Although a particular vessel may have a well-documented history of use and maintenance, it is in the best interests of the client that the findings of AIM Control's surveyor result specifically from its current state. The survey is therefore based solely on a Purchase Condition of Vessel careful survey inspection of all accessible portions of its structure and available equipment such as:

  • Hull/Deck/Coachroof laminates and cosmetic condition
  • Underwater body through hulls and seacocks
  • Interior frames/bulkheads and supporting structures
  • Rudder and steering gear
  • Propeller, shaft, cutless bearing, strut
  • Deck fittings, lifelines, stanchions, mooring cleats
  • Accommodation spaces - Interior finishes
  • Galley equipment - refrigeration
  • Fresh water tanks, pumps, hoses, heaters
  • Marine Sanitation Devices (MSD) - holding & discharge systems
  • Engine, fuel system, exhaust system
  • Electrical systems - 12VDC & 120VAC
  • Storage batteries - load testing
  • Navigation equipment/ electronics
  • Ground tackle, windlass
  • Spars and rigging
  • Fire fighting and Safety Equipment
  • LPG and CNG systems.

Under ideal circumstances, the Pre-purchase ship condition survey / the pre-purchase ship inspection consists of three phases of checklist and report sample

Phase I

Ashore with full access to the underwater body. All areas of the underwater body, side shells and deck/coach roof are inspected by "sounding" and testing with a moisture meter to determine the structural integrity of the vessel. The keel, rudder, hull penetrations, and propulsion components are evaluated. Electrical systems and electronics are tested. However, some testing of systems and verification of certain components, such as sea valves, stuffing boxes, and steering systems can only be done while afloat under operational conditions.

Phase II

Afloat with all tanks filled and all systems operating. Propulsion machinery is operated, but in a static mode only and not under load. The integrity of sea valves and hull penetrations can be verified. Certain auxiliary systems can also be run, but only to a limited extent.

Phase III

Sea trial underway with all machinery and systems operating. Sea trials are at the request of the client with the vessel operated by the owner or the owner's authorized agent. Propulsion machinery is operated under load and all systems and components can be tested under actual sea conditions. Generally, the following activities take place:

  • 40-60 minutes at normal cruising engine revolutions
  • Engine Instrumentation & controls checks
  • Engine block & exhaust temperature measurements
  • Engine exhaust system integrity evaluation
  • Full power trials (maximum engine revolutions)
  • Hard over to hard over (steering systems test)
  • Emergency stop
  • Steering astern
  • Operation of marine electronics and navigation gear
  • Demonstration of electrical system(s)
  • Demonstration of bilge pumping system(s)
  • Demonstration of potable water system
  • Demonstration of marine sanitation system
  • Demonstration of galley equipment

Contact with us for a Sample Marine Pre Purchase Ship Condition Survey Report

The Insurance Vessel Survey/ Casualty Investigation

Insurance underwriters periodically require that an inspection be done to verify that the vessel is an acceptable insurance risk. In this inspection, the insurance company is concerned with the overall structural condition of the vessel, its fair market value and, most importantly, the presence of any hazardous conditions that would affect its safety at sea.

Insurance surveys can be done when the vessel is afloat or ashore. If the vessel is afloat, the insurance company may require that it be hauled so that the condition of the underwater body, keel, rudder, and propulsion equipment can be evaluated.

The insurance survey is not as detailed as the pre-purchase survey and is not intended to be as comprehensive. Only critical systems are tested and cosmetic conditions are only noted when they markedly affect the vessel's value. Safety and structural issues are the primary concerns. The insurance vessel survey should never be accepted in lieu of a full pre-purchase survey when purchasing a vessel.

The Vessel Appraisal

This inspection determines the fair market value of a vessel and is used for a variety of purposes such as collateral, estate assessment, litigation, etc. The focus is upon the condition and value of the boat's structure and its accessories/equipment.

Please kindly review marine surveys of AIM Control Inspection Group.

Our People

At AIM Control, we draw upon and range of technical skills and have professional personnel qualified in a range of areas, typically; Master Mariners, Marine Engineers & Superintendents all offering specialised knowledge, having extensive seagoing experience in their particular field. Based in Vietnam, assignments are managed globally through operations in Vietnam, Asia.

AIM Control conducts a pre-purchase ship condition survey / inspection for a wide base of clients including

  • Ship Buyers
  • P&I Clubs, Underwriters (as full condition survey)
  • Ship Operators
  • Ship Brokers
  • Ship Chartering
  • Ship Others

See more our surveying and investigation, namely (but unlimited)

We are an independent marine inspectors, marine surveyors and incident & accident experts providing cargo insurance surveys, marine & ship survey, reports and certificates based in Vietnam, Hong Kong, China, India, Korea, Singapore & Asia, Italy, Germany, Unit Kingdom, Russia & Europe, the Middle East, Brazil, Chile, Argentina & Ect., Anywhere of Countries to protect your orders in good condition. Email: aimcontrol@hotmail.com, cell: +84903615612.

Experince

AIM Group's evidence of Pre-purchase ship condition survey / Inspection carried out on the MV "SEALORD" berthed at Tai Cang Port, China

Pre_purchase_Condition_Survey_MV_SEALORD

 

AIM Group's evidence of Pre-purchase survey of ship condition carried out on the MV "PAIMPOL" berthed at Hai Phong Port, Vietnam

Pre_purchase_Condition_Survey_MV_PAIMPOL

 

AIM Control's evidence of Pre-purchase inspection of ship carried out on the MV "XINHE" berthed at Vung Tau Port, Vietnam

Pre_purchase_Condition_Survey_MV_XINHE


AIM Control's evidence of Pre-purchase condition survey / Inspection carried out on the MV "Blossom Pescadores" berthed at Jinjiang Port, China:

Pre_purchase_Condition_Survey_MV_Blossom_Pescadores


Our evidence of ship pre-purchase inspection of condition carried out on the Barge "Hannah 3601" berthed at Chicago Port, United State of America (USA):

Pre_purchase_Condition_Survey_Barge_Hannah_3601
 

Next=> See more "the Pre-purchase vessel condition inspection (PPI)"

Contact us


 


Written : AIMGroup®
Show
Filter by
Enter keyword
Activity
Online support
Hotline : +84888889879
Cell : +84 903 615 612
Email : aim@aimcontrolgroup.com
Skype :
Field
Worldwide Inspection Services Vietnam (H.O)